From: roger orthrop
Email: rnpolishing1@aol.com
Phone: 269-240-3210
Classified:
have a set of aluminum heads for a small block chevy fresh from the machine shop ready to bolt on they are rhs 23 degree 68 cc chamber 219 cc intake runners 2.05 intake 1.60 exhaust 260 pounds @1.950 bind @1.180 manley valves,springs.they are cut for the big springs heads are for a roller cam i was running a 645/645 lift cam on these heads and it worked perfectly they have ben fully ported and polished 206 intake gasket have 7/16 studs comp cams guid plates angle plug heads have bronze guides have over 3000 dollors in these heads they are right and ready to go have to sell cause moved down a class and they dont allow aluminum heads
$1900.00
Facebook
Twitter
RSS
Email